W I D M A N

C u s t o m E l e c t r i c s

Set Neck Specifications

Deluxe Model

Schaller nickel tuners

Ebony headstock veneer

Ebony truss rod cover

Mother of pearl logo

Ivroid binding with Black/Ivroid purfling on headstock , neck, and body

Vintage bone nut 1 3/4"

Ebony fingerboard

Mother of pearl dots with black mother of pearl side dots

Compound radius fingerboard,

24 frets, 25.5" scale

2 way truss rod

Honduran Mahogany neck with long neck tenon

Bastonge Walnut top

One piece honduran mahogany body with sound chambers and body contours

3 way toggle selector switch

Lindy Fralin Pure PAFs with raw nickel covers, Neck 8K, Bridge 8.5K

Schaller roller bridge in nickel

B 7 Bigsby

1 volume and 2 tone controls, 500K CTS pots, Schaller nickel knobs

Nickel strap buttons

Custom Cedar Creek hard shell case in black alligator

DR Pure Blues strings

Nitrocellulose lacquer

Options include colors, pickups, hardware, and tonewoods

Classic Model

The set neck to the right and left is our Classic model. It was made with the sound-board of an old upright piano. I've had the soundboard for almost 20 years and finally got around to using it. I've been able to get 4 more tops out of it.

The pickups are Lindy Fralin P-90s, and there is a 3 way toggle switch with a single volume and tone control. The neck and headstock are Paua Ferro, with mother of pearl dots.

This Classic comes with an unbound headstock, Ivroid binding and rope purfling on the body, and a bound fingerboard of Paua Ferro. Other features are similiar to the Deluxe set neck. including a custom Cedar Creek case.

Both of these guitars were shown at the 2011 Montreal Guitar Show

Widman Custom Electrics is a registered trademark,